Poseidon Plants

Delmet stainless steel excellence since 1949

POSEIDON
SPRAY PICKLING BOOTH

ECO-FRIENDLY | LOW VOLUME | CLEAN | CONTROLLABLE | EFFICIENT

The POSEIDON series came about with the idea of creating a spray pickling and passivation plant that reduces the volume of chemicals used in this type of process. The low volumes involved make it possible to reduce operating costs related to heating, suction and maintaining the chemicals at optimal conditions. The separation of liquids from the processing area prevents operators from accidentally coming into contact with corrosive products. The advanced electronics allow the operating costs of the machinery to be monitored both locally and remotely. The unit is easily transportable and can be easily moved and/or shipped by disconnecting the utilities.

Spray pickling can be used successfully on many different workpieces: the only workpieces for which it is not appropriate to use this technique are long or complicated stainless steel pipes (piping) that cannot be treated internally by sprays.

Immersion or spray pickling?

From a technical point of view, when spray pickling can be used instead of immersion, it is unrivaled in terms of optimising consumption and the consequent savings. From a technological point of view, spray pickling is not always applicable to all workpieces and related pickling processes. And finally, from a commercial point of view, neither plant, immersion or spray, necessarily has a higher cost than the other, therefore this is not a discriminating factor when choosing between the two.

Energy saving

The electricity alone to heat and suction a 12,000 l (3x2x2 m) medium-sized tank throughout its life costs more than a spray system of the same size.

Huge volumes now reduced

A treatment tank for a single process has a volume of 12,000 l and if 3 processes are required - such as degreasing, pickling and passivation - the total reaches 36,000 l of stored chemicals, with the consequent authorisations. With the same requirements, the Poseidon spray plants can carry out the 3 processes at less than 500 kg total.

Low suction and heating

Still on the subject of savings, the suction and heating of a tank system must be continuous or programmed in time to reach the desired conditions. Poseidon spray systems are only heated and suctioned when necessary and reach optimal conditions in a very short time.

Limited chemicals

The plants have been designed in such a way as to use a limited quantity of fresh pickling liquid every processing cycle, which allows a programmed change of the liquid used: you always work with process liquids at maximum efficiency.

The future is recovery

The plants are always proposed to be coupled to water treatment units able to reduce water consumption by 70% and guarantee a perfect final result.

Costs under control

A spray pickling unit is able to measure the energy and water used and, by adding a couple of other figures, the processing costs can be determined with certainty: no more hidden costs, but complete management control.

Assistance in step with the times

Your spray systems will be supported by remote assistance, predictive maintenance and interfaced with your IT system.

Cleanliness and tidiness

Thanks to the new configuration, it is possible to have a clean and efficient plant and working environment.

POSEIDON PLANTS PHOTO GALLERY

Cabina Decapaggio Inox

POSEIDON WITH RINSING AREA

Advantages:

  • Carry out pickling and first rinse treatments
  • Rinsing box for the final rinsing of the workpieces
  • Stainless steel tank for rinsing workpieces with demineralised water
  • Last rinse water recovery unit

USABLE CHEMICALS POSEIDON PICKLING

To View the Safety Data Sheets you need to Register HERE
Name Description Instructions Safety Data Sheets
ECOINOX BA - STAINLESS STEEL PICKLING AGENTS
STAINLESS STEEL PICKLING AGENTS » NITRIC
Chemical Product for Pickling
Instructions for Use
ECOINOX SPEEDY - STAINLESS STEEL PICKLING AGENTS
STAINLESS STEEL PICKLING AGENTS » NITRIC
Chemical Product for Pickling
Instructions for Use
ECOPLUS 2000 SPEEDY - PICKLING AGENTS FOR STAINLESS STEEL
STAINLESS STEEL PICKLING AGENTS » NON-NITRIC
Chemical Product for Pickling
Instructions for Use
ECOINOX SPRAY - STAINLESS STEEL PICKLING AGENTS
STAINLESS STEEL PICKLING AGENTS » NITRIC
Chemical Product for Pickling
Instructions for Use
ECOINOX S SPRAY - STAINLESS STEEL PICKLING AGENTS
STAINLESS STEEL PICKLING AGENTS » NITRIC
Chemical Product for Pickling
Instructions for Use
ECOPLUS BLACK - STAINLESS STEEL PICKLING AGENTS
STAINLESS STEEL PICKLING AGENTS » NON-NITRIC
Chemical Product for Pickling
Instructions for Use

USABLE CHEMICALS POSEIDON PASSIVATION

To View the Safety Data Sheets you need to Register HERE
Name Description Instructions Safety Data Sheets
CLEANER SPRAY - STAINLESS STEEL CLEANERS
STAINLESS STEEL CLEANERS
Chemical for cleaning steel
Instructions for Use
PASSIVANT P OX SPRAY - STAINLESS STEEL PASSIVANTS
PASSIVATING AGENTS FOR STEEL » NON-NITRIC
Chemical for passivation
Instructions for Use

Plants, Contract Services, and Chemical Products for Steel Care

Excellent Results and Professional Support!

For the care of your steel, rely on true experts. With Delmet, corrosion and other issues affecting the surface treatments of stainless steel are numbered days!

Would you like to receive more information or speak with one of our managers? Fill out the request form next to this text, and you will be contacted as soon as possible.

CONTACT US

Do you need information? Fill out the form and we will respond as soon as possible.
   I have read and accept the privacy policy » Privacy policy *